The product is mainly applicable in the coal mine with explosive gas (methane mixture), to control, protect and measure in the three-phase AC neutral point not directly grounded power supply system of rated voltage 10KV, 6KV, rated frequency 50Hz.

The product is mainly applicable in the coal mine with explosive gas (methane mixture), to control, protect and measure in the three-phase AC neutral point not directly grounded power supply system of rated voltage 10KV, 6KV, rated frequency 50Hz.

It is used in coalminesin three-phase neutral ungrounded transmission lines with voltage AC 3300V,50Hz. It canmake local and remote control of three-phase asynchronous motor and concentrated control of coal cutter,scraper conveyor, crusher,reversed loader, pump station and other equipments of comprehensive mechanized coalfaces.

High-voltage soft starter is suitable for mines containing explosive gas (methane) and coal dust. In the AC 50Hz voltage of 10kV or 6kV lines, the control methods can be local control, remote control, network control and other control methods, used for high-power motors soft start and soft stop.

High-voltage soft starter is suitable for mines containing explosive gas (methane) and coal dust. In the AC 50Hz voltage of 10kV or 6kV lines, the control methods can be local control, remote control, network control and other control methods, used for high-power motors soft start and soft stop.

The soft starter is suitable for coal mines containing explosive gas (methane) and coal dust.In an AC 50Hz, voltage 1140V or 660V, neutral ungrounded power supply system, various forms of soft start (such as current clipping, voltage ramp and power torque ramp) are performed on three-phase squirrel-cage motors with currents up to 200A and 400A.The controller also has the perfect protection function and the fault display function, greatly reduces the time of troubleshooting.

Mining explosion-proof and intrinsically safe low voltage AC soft starter (hereinafter referred to as starter) is suitable for mine containing explosive dangerous gas and coal dust. in AC 50Hz, rated voltage AC1140V (660V) power supply system, four three-phase squirrel cage motors with current below 400A can be started in many forms (such as current limiting, voltage slope and power torque slope).

This product is suitable for an environment with coal mine gas, coal dust, and other explosive gases underground, to logically control the start, stop and double-speed of the three-phase AC asynchronous motor or AC double-winding motor in the circuit of AV 1140V or 660V. And it has a joint control function.

The device is used in coal mines containing explosive gas (methane) and coal dust. It is suitable for the circuit of AC 50Hz, voltage 660V or 1140V, ungrounded three-phase center. To local control or remote control the start and stop of three-phase asynchronous motor, and can be reversed at the stop.

Explosion Proof and Intrinsically Safe Dual Power Supply and Dual Circuit Lighting Transformer for Coal Mine ZJZ-16/1140(660)SM-2 This device is suitable for underground coal mine containing coal dust and explosive gas (methane). It can control the power supply of 127V grade lighting signal equipment, and the power supply is introduced as 50 Hz 1140V or 660V.

The device is used in coal mines containing explosive gas (methane) and coal dust. It is suitable for the circuit of AC 50Hz, voltage 660V or 380V, ungrounded three- phase center. To control the forward and reverse rotating of three-phase asynchronous motor.

Application:It is suitable for the dangerous environment of gas and coal dust explosion. Used for electrical control, monitoring and comprehensive protection of belt conveyor and other equipments in coal mine.